Body Repair Manual
Repair Materials and Tools
The following materials and tools are required to resin
bumpers:
Adhesive and Filler (examples):
• Bumper primer (clear type)
• Bond quick mender
• High art mat black
• High art thinner
• High art hardener
Primer surfacer (examples).
• Dual-liquid type bumper primer surfacer (gray) Refer-
ence (Isam Paint)
• Pigment: (1kg) (35.3 oz)
• Hardener: (100g) (3.5 oz)
• Thinner: (900 ) (30.4 . oz, 31.7 Imp. oz)
NOTE: Follow the manufacturer's recommendations
Tools:
• Putty knife • Brush
• Base (putty) • Masking tape
• Sandpaper • Masking paper
• Cutter
2. PUTTY BOND QUICK MENDER
After the PP primer has dried thoroughly, apply the
PUTTY BOND QUICK MENDER.
-1. Mix one part of the mender (A) and one part of the
hardener (B) and stir thoroughly.
NOTE: Do not mix the mender and hardener in excess of
20g (0.7oz) at a time.
1. Bumper Primer (Clear): Premixed type
The primer provides a good support for the filler and
primer surfacer. It is applied to the surface of the
bumper.
Polypropylene (PP) Resin Parts
Main Menu
Table of Contents