Body Repair Manual

10. Finish the welding areas.
• Finish grind the finishing allowance with a disc
sander until it is smooth.
To prevent eye injury, wear goggles
or safety glasses whenever sanding, cutting or
grinding.
• Smooth the flanged section of the door opening
with a hammer and dolly.
11. Apply the sealer (see section 5).
12. Apply the paint.
See Paint Repair section.
• Ventilate when spraying paint. Most paint
contains substances that are harmful if inhaled
or swallowed. Read the paint label before
opening the paint container.
• Avoid contact with skin. Wear an approved
respirator, gloves, eye protection and appropriate
clothing when painting.
• Paint is flammable. Store it in a safe place, and
keep it away from sparks, flames or cigarettes.
13. Apply anti-rust agent to the inside of the front pillar,
wheelhouse upper member and side sill (see section 7).
14. Install the related parts.
• Install in the reverse order of removal.
• Check the door for proper installation and level
difference from the fenders.
15. Clean and check.
• After installing the dashboard, check the lights and
gauges for proper operation.
• Clean the passenger compartment and check for
water leaks.
Main Menu
Table of Contents