Body Repair Manual

Areas to be Covered by Anti-rust Agents
Rust-preventive Treatments
Rust-preventive Treatments:
Hood, Underside
• Coat the entire panel and seams all the way around.
• Spray sufficient anti-rust agent to the front area and
each corner.
• Apply rust-preventive agent or grease to the hood
hinges.
• Also coat the bulkhead upper frame and hood frame with
anti-rust agent.
Nozzles used: A and B
Front Bulkhead Area
• With the hood opened, coat the joints of the bulkhead,
wheelhouse and side frame and around the back of the
headlight assembly.
Nozzle used: B
• Coat the inside of the front lower cross member.
Nozzles used: A and B
Dashboard Upper/Windshield Lower
• Coat the windshield lower and dashboard upper water
drain with anti-rust agent at front, right and left.
• Spray anti-rust agent completely over the rear of the
dashboard upper (windshield side).
NOTE: To insert the nozzle in the dashboard upper, remove
the air scoop grille for easier, more thorough spraying.
Nozzles used: A and B
Main Menu
Table of Contents