User`s manual

10
AEC-7763LC/LD & ARS-2022/2022D
3.2.2 Without a HDD
If you don’t install a 3.5” hard drive to ARS-2022D, the operation procedures will be
as follows.
l Place a source DVD into DVD-ROM.
l Switch to function 1 Copy by pressing ▲ . Place a blank DVD disk into
the DVD writer, and press ENT to start copying.
l When copying comes to an end, the passed DVD will eject automatically.
The default is automatic ejecting, but you can change it.
l The failed DVD will remain in the writer. The default is keeping a failed
DVD in the writer, but you can change it. To take the failed DVD you need
to press the “eject” button on the writer.