Specifications
53
ARS-2021/2021S Copy Smart Plus
Chapter 7 Trouble Shooting
1. No display on LCD or the unit does not operate when power on.
Please check the connection of power cable and the environment of power
outlet is normal.
Turn off the power of machine, open the case of duplicator to check whether
the power cable is fixed.
2. LCD shows the Error message.
During operation like Copy, Test, Compare and Verify, you may press ESC
button to abort the operation. An Error message will be shown no the LCD.
Some CD writers, abort will cause th duplicator to hang up and you have
to re-start the power to return to normal operation.
Failed reading may cause the error message shown on the LCD display.
Change the master CD to try again.
During operation, if read error, buffer under run or writing error occurs, the
LCD will show error message like: Pass xx, failed xx.
If there is no device connected and detected by duplicator during power-on,
the duplicator will show error message no LCD before entering the main
menu.
3. CD-ROM / CD-RW can not read disc and shows error message.
Check the format of master CD or master CD itself for damage.
Use any of the CD-Writers to read the master; if it works, the CD-ROM may be
defective or not compatible with CD-ROM.
Using CD-RW as the data reader, please set the “Read Speed” at minimum.
4. Buttons do not function.
May be still busy on task.
Button malfunction.
Faulty board.
5. Copy completed but CD-R disc is not readable / executable?
Use compare to check.
Change another CD-ROM drive to test.