Specifications
54
ARS-2021/2021S Copy Smart Plus
6. The failure rate is high.
Lower the speed of CD-Writer and try again.
Quality of bland disc is poor.
Check for latest firmware version.
Check the CD-Writer maximum writing speed. Over 24X writing process please
copy to hard drive first then to CD.
7. Can not boot-up or fail to upgrade firmware.
Contact your dealer to solve the problem. Please note you may be charged for
this.
Check the BIOS program is correct since normally customer will download
wrong program or simply write the zipped file to CD which should be first
unzipped before writing.
Failed upgrade might cause failed boot. This can only be solver by returning
the control board to agent or factory directly. It is not necessary to return
whole system under failed upgrade.
8. Can not find “12. Adv Setup” function.
Press “ESC” button for 2 seconds to enter the “Adv Setup”.
9. To cancel the duplicator working process.
Press “ESC” button for 2 seconds to cancel any “Copy”, “Test”, or “Verify” etc.
function while the job in working process.