Specifications

ARS-2030/2032 Copy Smart Plus

2. Without hard drive installation

! !

! Place master disc to CD-ROM.

! !

! Switch to Copy function by pressing arrow button. Place blank CD-R or CD-

RW disc into all the CD writers. Press “ENT” button to strat copying when all

writers detect the CD discs.

! !

! When Copy is completed on all CD writers, the passed CD disc will be

ejected (Default setting: discs passed will be ejected. This can be changed

according to your need). For continuous duplication, place additional blank

discs into the CD writers and repeat the above procedures.

! !

! Failed disc(s) will remain in respective CD writer(s) (Default setting: Failed

disc NOT ejected. This can changed according to your need). Press ENT

button will eject those failed CD discs from CD writers or press each eject

button on the CD writer to eject disc manually.

ATA-66 Cable Layout:

Please identify two different kinds of cable before the hardware installation.

1. Three connector for Source devices (CD-ROM / Optional

Hard drive)

2. Two connector for Target devices (CD-R/RW)

Connect to ARS-2030/

2032 IDE ports

Connect to IDE CD-R/RW

Connect to ARS-

2030/2032 IDE

ports

Connect to IDE CD-

ROM drive (Slave)

Connect to IDE hard

drive (Master)