Specifications

30
ARS-2030/2032 Copy Smart Plus
Burn Speed
24X
11-03. Setup
Read Speed
Read Speed
32X
11-01. Setup
Language
11-02. Setup
Burn Speed
5.11.1 Language (optional)
To set which message of language is shown on the LCD. There are
English, Traditional Chinese, Simplified Chinese and Japanese
languages are supported on LCD.
Press “ENT” to change the setting and “ESC” to
exit.
5.11.2 Burn Speed
This setting controls the maximum writing speed of CD writers.
Default setting is “Auto” which will use the highest writing speed of
the writers. Sometimes maximum writing speed will cause high
failure rate that may be due to poor CD quality or unstable CD writing
in high speed. Under this circumstance, please lower the writing
speeding under this setting to get higher successful rate in CD
writing.
Press “ENT” to enter the setting and “ESC” to
exit.
5.11.3 Read Speed
Setting the reading speed of the target source CD-ROM.
Press “ENT” to enter the setting and “ESC” to
exit.
Using arrow button to change the burning
speed then press “ENT”. (Depend on the CD-
RW maximum speed support)
Using arrow button to change the reading
speed then press “ENT”. (Depend on the CD-
ROM maximum speed support)