User`s manual

12
ARS-2030D/2030DS Manual
Chapter 3 Basic Instructions
3.1 Buttons and LCD
There are four buttons and an LCD on the panel of the copy smart plus. They are
described as follows.
1 2 4
3 5
1. It shows all functions and messages.
2. It is used to scroll up through functions or menus.
3. It is used to scroll down through functions or menus.
4. It is used to execute a selected function.
5. It is used to cancel a selected function.
After you power on,and the copy smart plus detects installed hardware like DVD-
ROM, DVD writers, it will execute a self-test for seconds. When the self-test finishes,
LCD will show the messages as follows.
1. 2.
DVD Duplicator
1-3 ver: 2.03K
Initialize SDRAM
Figure 1 represents ARS-2030D/2030DS. The firmware version for 1-7 ARS-2032D
is 2.03S and that for 1-14 ARS-2034D is 2.03X. Figures below all represent ARS-
2030D/2030DS, but you can substitute them with the other two models.