Installation Guide

PAGE 1 OF 2
TECHNICAL DATA SHEET
ACCEL® dust-preventing polymeric sand, with exclusive dust-suppression technology, minimizes on-site dust and haze
up to 90% compared with traditional jointing sand. Our latest innovation helps with improving on-site air quality with an
engineered, safer formula for concrete, flagstone, pavers, and natural stones.
ACCEL is a formulated mixture of a substrate, polymers and additives used as joint infill in the installation of all types of
pavers and patio stones. When properly installed ACCEL provides both a firm and flexible joint to facilitate a long-term
solution to your hardscape needs. ACCEL is manufactured with exclusive dust-suppression technology that represents a
major dust control advancement while eliminating or minimizing post-installation haze.
• Proprietary dust control technology • Durable and flexible paver joint
• Complete or substantial elimination of haze • Consistent joint activation
• Elimination or minimizing of dust migration to existing • Represses weed growth and insects
structures and landscaping • Reduces joint erosion
• Uniform gradation
• Temperature must be above 32° F during and for 48 hours following installation.
• Due to the moisture content of clay pavers and possible premature activation of the polymeric sand, pavers
must be completely dry prior to installation of polymeric sand.
• Polymeric sand should not be diluted with any other material prior to or during installation.
• Pavers must be installed on a drainage base composed of an upper layer of a maximum 1 inch thickness of
bedding sand and a lower layer of compacted crushed stone.
• Polymeric sand must be installed from the top of the upper layer of the drainage base to a height of 1/8”
from the top of the paver or stone substrate.
• All paver surfaces must be a slope of 1/8” per linear foot away from structures to ensure optimal performance.
• If using ACCEL to replace existing jointing materials, old jointing materials should be completely removed
prior to installation.
FEATURES & BENEFITS
PRODUCT APPLICATIONS
ACCEL® Dust-Preventing Polymeric Sand
Joint Type Traditional, false and irregular
Joint Width from 1/8” to up to 1/2” wide
Bag Size 50 lb. (22.7 kg)
Coverage Narrow joints: approximately 20-80 ft
2
Colors Saddle Tan and Shadow Grey
Serena, IL #733
Dust-Preventing Polymeric Sand
ACCEL
®
INSTALLATION