User Manual

TRK2XX Initiation Manual
15
 A battery subject to extremely low air pressure (low air pressure at high altitude) that
may result in a explosion or the leakage of flammable liquid or gas
 WARNING: Never attempt to open the battery for any reason. If battery case is cracked or
damaged, do not insert into charger. Do not crush, drop or damage battery.
11.Human interfaces
The TRK2XX devices have three different elements to interact with the user. The different
elements are:
 Button(SOS button): the first time that the TRK is on is used to perform the the key
provisioning with the TRK. After it is used to report SOS function to the Inmolecular
platform.
Figure 6 - Button position
 Buzzer: every time that the button is pressed there is feedback from the buzzer to indicate
to the user that the button is being pressed.
 RGB LED: is used to indicate to the user various states:
 Blinking blue normal mode, just to indicate the correct behaviour of the TRK device.
 Blinking red: low battery, less than 10%.
 Blinking yellow: battery charging
 Static green: battery fully charged.
 Additionally in the autotest process, the possible led state indication could be.
 Blinking yellow: autotest in process, it only happens the first time that TRK powers ON.
 Static wait during two seconds: attaching to network failed
SOS button