User Manual

TRK2XX Initiation Manual
18
The parameters to set are the following ones:
 Sending types: used to set the between all the possible technologies that the TRK2XX has:
NB-IOT, LTE-M and GPRS or a combination of them.
 MCC and MNC: this values are provided by the operator. In the next firmware versions it
will be possible to set it to automatic.
 NBIOT IP: is the IP address of Inmolecular platform, have to be 35.195.70.23
 NBIOT port: is the listen port of Inmolecular platform have to be 44301
 NBIOT band, GSM band and LTE-M: the device have multiple bands to operate depending
on the operator infrastructure. Please, contact with your network operator to know exact
bands operation for your TRK. Multiple choices could be used, but we recommend to only
the ones that your SIM card allows.
 APN configuration: contact your network operator / SIM card provider to know your APN
configuration.
With all the parameters in place, the TRK will report information to Inmolecular platform. To
identify the TRK inside your Inmolecular dashboard, please check the QR code on the bottom
of your TRK device.
Figure 10 - QR code and Inmolecular platform TRK serial number matching
15. TRK2XX advanced configuration
TRK2XX series advanced configuration depends on the firmware version. Please refer to
TRK2XX Advanced configuration manual.
16.Accent Systems Support
Contact [e-mail]