User's Guide

Accent 800 User’s Guide-Empower 23
Removing the Stand
If you do not want to use the stand, you can remove it from the back of
the device. You can reattach it at any time.
Loose holders, screws, and washers could be a choking hazard.
First, place the device face-down on a flat surface.
To remove the stand:
• Using a Phillips screwdriver, remove the two screws from each
side that hold the stand to the back of the device.
• Pull the stand free and put it in a safe place in case you need to
use it later
To replace a stand stop (in case it is broken, for example):
• Remove the two screws from the arms of the stand.
• Push the end of the stand arm out of the way. (Or remove the
stand completely if you prefer.)
• Remove the screws holding the stand stop to the back of the
device.
• Remove the old stop, replace it with the new stop, insert the
screws, and reattach the stand.
Screws holding
stand to back of
device
Screws holding
stand stop to
back of device