User's Guide

Accent 800 User’s Guide-Empower 25
Attaching the Top Port Cover
If you removed the handle and are not going to mount a NuPoint
module, it is important to attach the port cover to protect the Mini USB
Connector on the top of the device.
1. Line up the holes in the cover with the holes on the back of the
device.
2. Insert and tighten the two screws that previously secured the
handle.
To remove the port cover:
Remove the two screws that hold the port cover in place. Use the
screws to mount a NuPoint module or to reattach the handle.
Note: Store the port cover where you can find it if you need to use it
again.