User's Guide

Accent 800 User’s Guide-Empower 27
2. Align the holes in the reflector with the empty holes in the handle,
port cover, or NuPoint module.
Important! Make sure the reflective shield is aimed downward
toward the back of the device, as shown in step 3.
3. Insert the appropriate screws in the holes, as shown.
Handle or Port Cover
NuPoint Module
4. Tighten the screws.
Reflector side
pointing downward
Insert
short screw
Insert
short screw
Reflector side
pointing downward
Insert
long screw
Insert
long screw