User's Guide

Accent 800 User’s Guide-Empower 31
Attaching the Frame More Securely
If you do not expect to remove and reattach the frame to the device
frequently, you may want to insert the original screws in the top and
side holes of the frame. If you expect to remove and reattach the frame
to the device frequently, you may not want to use the screws.
1. Place the device face-down on a flat surface.
2. Insert the two screws with wood-style threads that you removed
earlier (page 29, “Removing the Frame”, step 2) through the holes
in the top of the frame and into the corresponding holes in the top
of the device.
3. Insert the other two screws that you removed earlier through the
holes in each side of the frame and into the corresponding holes in
the sides of the device.
4. Tighten all four screws with a Phillips screwdriver.
When the device frame is attached securely:
After you attach the frame securely to the device, you can attach a
Keyguard or TouchGuide to the frame. See “Attaching the Keyguard” on
page 32 or “Attaching the TouchGuide” on page 35.