User's Guide

Accent 800 User’s Guide-Empower 35
Attaching or Removing a TouchGuide
Your device came with a frame mounted on it. The TouchGuide attaches
to the frame. If you removed the frame, first reattach it, referring to
“Removing or Replacing the Device Frame” on page 29.
Attaching the TouchGuide
1. Align the TouchGuide so that the two squares at the top are
positioned at the upper right corner of the display.
Then insert the bottom tabs of the TouchGuide into the slots at the
bottom edge of the frame.
2. With the bottom tabs in place, lift upward with your fingers to bend
the top right corner of the TouchGuide slightly and insert the tab
into the top right slot of the frame.
Position squares
in upper right
Insert bottom
tabs into slots
Note: The TouchGuide plastic
is stiff and may require some
effort to bend.