User's Guide

Accent 800 User’s Guide-Empower 80
Creating a Customized Scan Pattern
Use the Set Scan Blocks settings to create, reorder, preview, and clear
scan blocks.
1. Go to the vocabulary page on which you want to set up a scan
pattern.
2. Select Menu > Editor > Set Scan Blocks.
3. Select Create Blocks. The Create Blocks button turns blue, indicating
it is active.
Note: As long as the Create Blocks button remains active, you can
create a numbered sequence of scan blocks on the page. If you
select Create Blocks again before selecting Save, the blocks you
created will be lost and you’ll need to create them again.
4. Select the button to include in the upper left corner of your first
scan block. A red border will appear around the button.