User's Guide

Accent 800 User’s Guide-Empower 216
Connecting Your Device to a Switch
Use the Switches tab to connect your device to an AeroSwitch® or
Freedom Switch™, depending on which Accent model you have.
1. Select Menu > Toolbox > System Settings > Devices & Connections.
2. Select the Switches tab.
3. Turn the switch on.
4. Select the “Connect Switch” Connect button. A message will prompt
you to press the switch to pair it.
5. Within 10 seconds, press the switch.
Note: If you do not press the switch within 10 seconds of seeing the
message, the switch will not connect to the Empower software on
your device.
6. If you plan to use more than one switch, repeat steps 3 through 5
for each additional switch.
7. Select Close.
To disconnect (unpair) all switches:
If you want to disconnect (unpair) all switches from Empower on your
device, select Disconnect all.
Important! If multiple switches are connected, you cannot disconnect
only one. Selecting Disconnect all disconnects all previously connected
switches.