User's Guide

Accent 800 User’s Guide-Empower 262
Fixing or Adding a Signal
Sometimes you will find that one of the buttons on your remote control
page is not working.
1. Select Edit IR Remote.
2.
Choose the remote you want to edit.
3.
Select Learn IR Signal.
4.
Select the button that is not working.
5. Point the remote control at the top back of your Accent.
6. Select Learn Signal Now. You will have 10 seconds to teach Empower
the signal.
7. Press and release the button on the remote control that you want to
learn.
8. You will hear the Accent beep if the signal is learned. If not, try again.
9. Select Test Current Signal to confirm that the signal is working.
Adding a Favorite Channel Button
1. From your remote control page, find and select the Enter Channel
button.
2. Use the numbers to enter your favorite channel.
3. Find and select the Save Channel button. It will turn blue.
4. Then select a Fav Channel or empty button to place your favorite
channel.
5. Your favorite channel is now stored on the button. You can use the
Editor to change the label or add a symbol such as Nick Jr. or ESPN.
Note: Your customized IR Remote Controls will be exported/imported
when you export/import a User in the System Settings tab of the Toolbox.