User's Guide

Accent 1400 User’s Guide 32
The WordPower Device Configuration
The WordPower language system is uniquely designed by Inman Innovations. The WordPower
configuration has two versions, WordPower and Picture WordPower. The WordPower vocabularies are
word-based and give individuals access to a keyboard, word prediction, and core vocabulary. The Picture
WordPower vocabularies are similar, but provide more picture support. They come in 45, 60, 84, and
144 locations. Version are available with and without a keyboard on the home screen. For more
information, visit http://www.inmaninnovations.com/.
A WordPower-configured device ships with WordPower vocabularies as the default. When purchased as
an add-on to a Unity-configured device, WordPower vocabularies and settings can be loaded as a
product configuration. To configure the device for the WordPower language system, follows steps 1-5
under “CoreScanner” above, substituting WordPower for CoreScanner in step 3.
Using the Exploration Wizard
1. Use the Wizard to select one of the vocabulary options or the Target Practice exercise or Picture
Test exercise.
2. If the vocabulary you want does not appear on the Wizard,see “Changing the Vocabulary” or
“Replacing the Vocabulary” below.
3. To return to the Wizard from a vocabulary screen, see “Changing the Vocabulary” below.
Accessing the Toolbox
The Toolbox is the area where you can make changes to the device. Access the Toolbox by selecting the
Tools key and then select the Toolbox key from the pop-up menu. As an alternative, you can
select the Tools key twice.
Changing the Vocabulary
Follow these steps to switch from one available vocabulary to another.
1. Select the Tools key and then select the Toolbox key.
2. Select User Area Menu.
3. Select Switch User Area. Then select the vocabulary you want and wait for it to load.
4. Select the OK button in the lower right corner of the screen twice to return to the vocabulary screen.
Note: If the vocabulary you want is not available in the Switch User Area, see the next section,
“Replacing the Vocabulary”.
Replacing the Vocabulary
Follow these steps only if you want to completely replace one vocabulary on your device with another.
1. Select the Tools key, select the Toolbox key, and then select User Area Menu.