User's Guide

Accent 1400 User’s Guide 34
7. To test the pronunciation immediately, select the message window. If the pronunciation is not correct,
change it and test again. When the pronunciation is correct, select OK. The word will be listed on the
Manage Pronunciations screen.
Note: You can test the pronunciation of any word listed on the Manage Pronunciations screen by
selecting Test Pronunciation.
8. Select OK to exit the Manage Pronunciations screen.
Changing the Access Method
To change the method you use to control your device:
1. Select the Tools key and then select the Toolbox key.
2. Select Access Method Menu and then select Choose Different Access Method.
3. Select Touch, 1 Switch, 2 Switch, Headpointing/Joystick, or Eyegaze. The Access Method Menu will
show the method you selected.
4. From the Access Method Menu, change the access method settings as necessary.
Accessing the Setup Key
1. Select the Tools key.
2. From the slide-out menu, select Setup Key.
3. Select the key you want to customize.
Customizing a Key
1. Be looking at the key you want to customize. Select the Tools key and then select Setup Key.
2. Select the key and select Change Icon. Do either of the following:
To use an image available on the device: Select Spell Icon to Find, spell what you are looking for, and
select OK. Touch the icon you want or select an icon category and browse to the icon you want.
To use your own photo: Plug a USB flash drive that has the photo you want into the device. Select Import
Icon. If the content of the flash drive is showing, touch the photo you want to import. If not, select Up
Folder to navigate to the flash drive, and then touch the photo. Select OK, select OK again, and then
select Cancel. The photo will be placed on the key and in the imports folder of the icon dictionary.
3. Check to see if the “text to speak” is correct. If not, select Spell Message or Define Key Function to
type text that will appear in the display. Be sure to put a space after the last character. Select OK.
4. Check to see if the key label is correct. If it isn’t, select Change Label and then select OK.
5. Select OK or Choose Next Key to Define.