User's Guide

Accent 1400 User’s Guide 44
4. Tighten the screws.
Removing or Replacing the Device Frame
Your device came with a frame mounted on it. If you need to remove or replace the frame, follow these
instructions.
Removing the Device Frame
Your device came with a frame mounted on it. If you need to remove the frame, follow these instructions.
1. If you are using a keyguard or TouchGuide, remove it from the frame.
2. Remove the four screws that secure the frame to the device—two on the top and two on the bottom.
Note: If you are replacing the frame, set these screws aside. You will use them to reattach the new
frame. If you are not replacing the frame, store these screws in a safe location in case you later
decide to reattach the frame.
Loose screws could be a choking hazard.
3. Pull the sides of the frame loose from the device.Hint: You may want to use a flat-head screwdriver or
a similar tool.
Insert the two
short screws
Reflector side
pointing downward