User's Guide

Accent 1400 User’s Guide 47
If you do not expect to remove and reattach the frame to the device frequently, you may want to insert
the original screws in the top and bottom holes of the frame. If you expect to remove and reattach the
frame to the device frequently, you may not want to use the screws.
1. Place the device face down on a flat surface.
2. Insert the two small screws that you removed
earlier through the holes in the top of the
frame and into the corresponding holes in
the top of the device.
3. Insert the two larger screws through the
holes in the bottom of the frame and into
the corresponding holes in the bottom of
the device.
4. Tighten all four screws with a Phillips screwdriver.
When the Device Frame is Attached Securely
After you attach the frame securely to the device, you can attach a keyguard or TouchGuide to the
frame.
Step 2
Step 3