ITEM NO. / ARTICLE NO. / ARTICULAR NO : DS-D318-804 ASSEMBLY INSTRUCTIONS / NOTICE DE MONTAGE / INSTRUCTIONS DE MONTAIGNE DESCRIPTION / DESCRIPCION/Description :Bar counterargument de comparability bar Step 1. Starting with Back Panel B on it's front edge on the floor, insert the hardware of Left & Right Side Panels (Parts A & C) into Back Panel B and press down to secure into place making sure that the grooves in the side panels are facing inward. Step 2.
ITEM NO. / ARTICLE NO. / ARTICULAR NO : DS-D318-804 ASSEMBLY INSTRUCTIONS / NOTICE DE MONTAGE / INSTRUCTIONS DE MONTAIGNE DESCRIPTION / DESCRIPCION/Description :Bar counterargument de comparability bar Step 3. Insert the hardware on left & right side panels and middle dividers ( Part A& C& D) into Front Frame ( Part H) and press down to secure into place. Make sure that the tops of the side panels and front frame are flush. Step 4.
ITEM NO. / ARTICLE NO. / ARTICULAR NO : DS-D318-804 ASSEMBLY INSTRUCTIONS / NOTICE DE MONTAGE / INSTRUCTIONS DE MONTAIGNE DESCRIPTION / DESCRIPCION/Description :Bar counterargument de comparability bar Step 5. Insert the Middle Shelves (Part I8J) through the cabinet to the position where there is shelf support (Part 0) Step 3. Inge rt the hardware on left & right Wing shape panel ( Part P) into Back Frame ( Part B) and press down to secure into place.
ASSEMBLY INSTRUCTIONS / NOTICE DE MONTAGE / INSTRUCTIONS DE MONTAIGNE ITEM NO. / ARTICLE NO. / ARTICULAR NO : DS-D318-804 DESCRIPTION / DESCRIPCION/Description :Bar counterargument de comparability bar Step 7. Insert the dowels (Part K) into the top of the Wing shaped panel (Part P) and side panels (Parts sure that all of the indicated by the straight arrow in the diagram below.
ITEM NO. / ARTICLE NO. / ARTICULAR NO : DS-D318-804 i ASSEMBLY INSTRUCTIONS / NOTICE DE MONTAGE / INSTRUCTIONS DE MONTAIGNE DESCRIPTION / DESCRIPCION/Description :Bar counterargument de comparability bar Step 9 Insert the Drawer Bottom (Part T) into the grooves in the side panels and press forward until the front edge goes completely into the groove in the drawer front. Add the Back Panel (Part S) making sure the bottom panel insert completely into the groove.
ITEM NO. / ARTICLE NO. / ARTICULAR NO : DS-D318-804 ASSEMBLY INSTRUCTIONS / NOTICE DE MONTAGE / INSTRUCTIONS DE MONTAIGNE DESCRIPTION / DESCRIPCION/Description :Bar counterargument de comparability bar Step 11. Use the Bolt M insert into the per-drilled hole , match to the handle L on the other side of the door. Tum clockwise to tighten. The same operation for the next door panel.