User Instructions

Maintenance

Your Atmosphere Mini™ Air Treatment System should be cleaned and maintained regularly for

optimum performance.

As Needed

Wipe the housing exterior with a damp cloth and dry. If very dirty, use a mild detergent, such as

L.O.C.™ Multi-Purpose Cleaner. Do not use cleaners containing ammonia, alcohol, or paint

thinner. These cleaners will damage the surface.

Cleaning the Pre-Filter

To maintain maximum system air flow, remove excess dust build up from the prefilter using the

following instructions.

1. Power off and unplug the unit.

2. Remove the front cover of the unit by placing your fingertips under the uppermost edge of the

front shield, gently pull up on the shield to disengage (should hear snap) then pull the shield

away from the front of the unit.

3. Remove accumulated dust from the Pre-Filter stage (front of filter) with a vacuum cleaner or dry

brush/cloth. Do NOT clean with water or any liquid.

4. Replace the front shield by positioning the shield over the display and let it gently fall into place

engaging the magnets on the bottom of the shield. Then gently push until you hear a soft snap

at the middle of the shield at the uppermost edge of the display.

5. Plug in your unit and power on.