User Instructions

1
1
Customer Service:
Please read this manual carefully. If you
have questions concerning the installation
or operation of your Atmosphere Mini™ Air
Treatment System or to order replacement
parts, please contact Customer Service or via
the Internet at: amway.com/shopatmosphere.
US – 1-800-253-6500, [e-mail]
Go to Amway.com for your return form and
additional return information such as how
to’s, tracking information, and processing fees.
Track your return with an Amway return label
at: returnscenter.smartlabel.com/amway. For all
returns, Amway Independent Business Owners
are charged a processing fee per invoice. Any
merchandise returned due to errors or damages
upon delivery will not incur a processing fee.
We are not liable for return merchandise that
doesn’t not reach our returns facility.
FCC COMPLIANCE STATEMENT
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
» Reorient or relocate the module/product.
» Increase the separation between the equipment and module/
product.
» Consult the dealer or an experienced radio/TV technician
for help.
» Changes and modications made to the equipment without
the approval of manufacturer could void the user’s authority
to operate this equipment.
» To comply with FCC RF exposure limits set forth for an
uncontrolled environment, the equipment should be
installed and operated with a minimum distance of 20cm
between the radiator and your body.
Replacing the Filter
1. Power off and unplug the unit.
2. Remove the front cover of the unit by placing your fingertips under the uppermost edge of the
front shield, gently pull up on the shield to disengage (should hear snap) then pull the shield
towards the front of the unit.
3. Remove the old filter and dispose of per local regulations.
4. Remove your new filter from the packaging.
5. Install your new filter into your unit.
6. Replace the front shield by positioning the shield over the display and let it gently fall into place
engaging the magnets on the bottom of the shield. Then gently push until you hear a soft snap
at the middle of the shield at the upper most edge of the display.
7. Plug in your unit on power on.
8. The filter monitor light will automatically change from red to green.
ENGLISH 7