Installation Sheet

1
2
4
2
CERTIFICATION: cULus WET NO. 20291/20291LEDDLP
3
MOUNT THE CANOPY
Align the fixture canopy to the crossbar and all-thread
and secure with supplied thumb screw.
INSERT THE BULB
Insert the bulb .
DO NOT EXCEED THE MAXIMUM WATTAGE AS
STATED ON THE WARNING LABEL.
PREPARE FIXTURE
If there is an existing fixture remove it.
Expose the supply wire from the outlet box .
Secure the crossbar to the J-box with the supplied
screws.
CONNECT THE WIRES
Connect the black supply wire to the black fixture wire.
Secure with the supplied wire nuts. Connect the white
supply wire to the white fixture wire. Secure with the
supplied wire nuts. A
ttach the green J-Box wire around
green hexagonal head screw or connect it to the green
supply grounding wire of the fixture.
Secure all wires
with U.L. Certified electrical tape (not supplied).
Tuck all wires carefully into the J-Box.