Installation Sheet

PREPARE FIXTURE
If there is an existing fixture remove it.
Expose the supply wires from the J-box .
Secure the crossbar to the J-box with the supplied screws.
Ensure that the additional screws face downward.
1
2
2
CERTIFICATION: cULus DAMP NO. 50080/50080LEDDLP
3
CONNECT THE WIRES
Gently pull the supply wires through the hole in the
crossbar. Connect the black supply wire to the black
fixture wire. Secure with the supplied wire nuts.
Connect the white supply wire to the white fixture wire.
Secure with the supplied wire nuts.
Attach the green J-Box
wire around green hexagonal head screw or connect it to
the green supply grounding wire of the fixture.
Secure all
wires with U.L. Certified electrical tape (not supplied).
Tuck all wires carefully into the J-Box.
MOUNT THE CANOPY
Fit the fixture canopy up to the crossbar. Insert the
hanging screws into the designated holes in the canopy.
Secure with the supplied thumb screws.
Tighten 3pcs threaded rods to the canopy.