Installation Guide

2
2
CERTIFICATION: cULus DAMP NO. 20670/20670LEDDLP
3
MOUNT THE CANOPY
Fit the fixture canopy up to the crossbar. Insert the
hanging screws into the designated holes in the canopy.
Secure with the supplied thumb screws.
CONNECT THE WIRES
Connect the black supply wire to the black fixture wire.
Secure with the supplied wire nuts. Connect the white
supply wire to the white fixture wire. Secure with the
supplied wire nuts.
Attach the green J-Box wire around
green hexagonal head screw or connect it to the green
supply grounding wire of the fixture.
Secure all wires
with U.L. Certified electrical tape (not supplied).
Tuck all wires carefully into the J-Box.
PREPARE FIXTURE
If there is an existing fixture remove it.
Expose the supply wire from the outlet box .
Secure the crossbar to the J-box with the supplied screws.
Ensure that the additional screws face downward.
1