Installation Guide

WHAT YOU NEED
•
Screwdriver
• Wire Cutters
• Wiring Supplies as Specified
by Electrical Code
• 1 x 75W E26 A19 Bulb (20670)
3
CERTIFICATION: cULus DAMP NO. 20670/20670LEDDLP
5
6
Please ensure that the fitting is cool and
switched off before replacing the bulb.
DO NOT use bulbs that might exceed the
maximum wattage, stated on caution label.
CAUTION
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS LIGHTING FIXTURE
SECURE GLASS SHADE
Hold the glass shade up to the canopy. Rotate
the glass so that the glass is secured to the canopy.
4
INSERT THE BULB
Insert the bulb.
DO NOT EXCEED THE MAXIMUM WATTAGE
AS STATED ON THE WARNING LABEL.
VER: 18.11.1