Instructions / Assembly

1
2
4
2
CERTIFICATION: cULus DRY NO. 29011LEDDLP
3
ATTACH MOUNTING BRACKET AND
MAKE WIRE CONNECTION
If there is an existing fixture remove it. Expose the supply
wires from the J-box.
Attach the mounting bracket to the
J-box with the supplied screws.
Gently pull the supply
wires through the hole in the mounting bracket. Connect
the black supply wire to the black fixture wire. Secure
with the supplied wire nut. Connect the white supply wire
to the white fixture wire. Secure with the supplied wire
nut.
Attach the green J-Box wire around green hexagonal
head screw or connect it to the green supply grounding
wire of the fixture.
Secure all wires with electrical tape
(not supplied). Tuck all wires carefully into the J-Box.
ATTACH THE CANOPY
Hold the canopy up to the mounting bracket and
secure with the supplied screws.
INSTALL GLASS SHADES AND INSERT
THE BULB
Align the outer and inner glass shade fittings onto the
socket and secure with the supplied socket ring.
Insert the bulb .
DO NOT EXCEED THE MAXIMUM WATTAGE AS
STATED ON THE WARNING LABEL
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS LIGHTING FIXTURE
Please ensure that the fitting is cool and
switched off before replacing the bulb.
DO NOT use bulbs that might exceed the
maximum wattage, stated on caution label.
CAUTION
VER: 20.01.1