Installation Guide

2
4
2
CERTIFICATION: cETL DAMP NO. 50037
3
MOUNT THE CANOPY
Hold the fixture canopy up to the crossbar. Align the
holes in the canopy with the designated retaining screws
of the crossbar. Using the supplied screw nuts secure the
canopy to the crossbar.
PREPARE FIXTURE AND CONNECT THE WIRES
If there is an existing fixture remove it.
Expose the supply wire from the outlet box .
Secure the crossbar to the J-box with the supplied screws.
Connect the black supply wire to the black fixture wire.
Secure with the supplied wire nuts. Connect the white
supply wires to the white fixture wire. Secure with the
supplied wire nuts. Either wrap the green wire around
one of the protruding screws or connect it to the supply
ground wire. Secure all wires with U.L. Certified electrical
tape (not supplied).
SECURE THE GLASS SHADES
Secure the 3pcs glass shades to the glass holders with
the supplied screws