Installation Guide

WHAT YOU NEED
•
Screwdriver
• Wire Cutters
• Wiring Supplies as Specified
by Electrical Code
CERTIFICATION: cETL DAMP NO. 50037
5
6
Please ensure that the fitting is cool and
switched off before replacing the bulb.
DO NOT use bulbs that might exceed the
maximum wattage, stated on caution label.
CAUTION
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS FIXTURE
3
INSERT THE BULB
Insert the supplied bulb .
MAXIMUM WATTAGE 200W.
DO NOT EXCEED THE RECOMMENDED WATTAGE AS
STATED ON THE WARNING LABEL AND
INSTRUCTION SHEETS.
SECURE GLASS SHADE
Hold the glass shade up to the canopy and secure
with the supplied screws.