Installation Sheet

2
2
CERTIFICATION: cULus DAMP NO. 50182
3
MOUNT THE BACK PLATE
Align the holes in the back plate with the protruding
screws from the crossbar. Insert the screws through
the holes in the back plate and secure with
the supplied thumb nuts.
CONNECT THE WIRES
Gently pull the supply wires. Connect the black supply
wire the black fixture wire. Secure with the supplied
wire nuts. Connect the white supply wire to the white
fixture wire. Secure with the supplied wire nuts. Either
wrap the green wire around one of the protruding screws
or connect it to the supply ground wire. Secure all wire
with electrical U.L Certified electrical tape (not supplied).
Tuck all wires carefully into the J-box.
MOUNT CROSSBAR
If there is an existing fixture remove it. Expose the
supply wires from the j-box. Mount the crossbar to
the j-box. Gently pull the wires through the center
hole in the crossbar.
1