Instructions / Assembly

1
WHAT YOU NEED
•
Screwdriver
• Wire Cutters
• Wiring Supplies as Specified
by Electrical Code
2
4
2
CERTIFICATION: cULus DRY NO. 52057LEDDLP
3
MOUNT CROSSBAR
If there is an existing fixture remove it.
Install the crossbar and mount it to the J-Box with
the supplied screws.
MAKE WIRE CONNECTION
Put the holder wire through the glass shade, glass
shade top cover and rod and secure the holder wire
nut to the canopy. Expose the supply wires from
the J-box. Gently pull the supply wires through the
hole in the canopy and crossbar plate. Connect the
black supply wire to the black fixture wire. Secure
with the supplied wire nuts. Connect the white supply
wire to the white fixture wire. Secure with the supplied
wire nuts. Attach the green J-Box wire around green
hexagonal head screw or connect it to the green supply
grounding wire of the fixture. Secure all wires with
electrical tape (not supplied). Tuck all wires carefully
into the J-Box.
INSERT THE BULB
Insert the bulb.
DO NOT EXCEED THE MAXIMUM WATTAGE AS
STATED ON THE WARNING LABEL.
Please ensure that the fitting is cool and
switched off before replacing the bulb.
DO NOT use bulbs that exceed the
maximum wattage, stated on caution label.
CAUTION
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS LIGHTING FIXTURE
VER: 18.12.1