Installation Sheet

1
2
4
2
CERTIFICATION: cULus DRY NO. 52103LEDDLP
3
ATTACH MOUNTING BRACKET AND MAKE
WIRE CONNECTION
If there is an existing fixture remove it. Secure the mounting
bracket to the junction box with the supplied screws. Expose
the supply wires from the J-box.
Connect the black supply
wire to the black fixture wire. Secure with the supplied wire
nuts. Connect the white supply wire to the white fixture wire.
Secure with the supplied wire nuts. Attach the green J-Box
wire around green hexagonal head screw or connect it to the
green supply grounding wire of the fixture. Secure all wire
with electrical tape (not supplied). Tuck all wires carefully
into the J-Box.
MOUNT THE CANOPY
Align the canopy to the mounting bracket and secure with
the supplied thumb screw.
INSERT THE BULBS
Insert the bulbs.
Align the decorative lamp rings onto the bulbs and secure
with the supplied screws.
DO NOT EXCEED THE MAXIMUM WATTAGE AS
STATED ON THE WARNING LABEL.
Please ensure that the fitting is cool and
switched off before replacing the bulb.
DO NOT use bulbs that might exceed the
maximum wattage, stated on caution label.
CAUTION
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS LIGHTING FIXTURE
VER: 20.01.1