Installation Sheet

2
4
2
CERTIFICATION: ETL DRY NO. 52203
3
MOUNT THE CANOPY
Fit the fixture canopy up to the crossbar. Insert the
hanging screws into the designated holes in the canopy.
Secure with the supplied screws.
INSERT THE BULBS
Insert the bulbs .
MAXIMUM WATTAGE 50W.
DO NOT EXCEED THE RECOMMENDED WATTAGE AS
STATED ON THE WARNING LABEL AND
INSTRUCTION SHEETS.
SECURE THE SOCKET RING
Place the socket ring over the bulb and secured
with supplied screws.
CONNECT THE WIRES
Connect the black supply wire to the black fixture wire.
Secure with the supplied wire nuts. Connect the white
supply wires to the white fixture wire. Secure with the
supplied wire nuts. Either wrap the green wire around
one of the protruding screws or connect it to the supply
ground wire. Secure all wires with U.L. Certified electrical
tape (not supplied).
Tuck all wires carefully into the J-Box.