Instructions / Assembly

1
2
4
2
CERTIFICATION: cETLus DAMP NO. 62165LEDDLP
3
ATTACH MOUNTING BRACKET AND MAKE
WIRE CONNECTION
If there is an existing fixture remove it. Expose the supply
wire from the J-box.
Secure the mounting bracket to the J-box
with the supplied screws. Connect the black supply wire to the
black fixture wire. Secure with the supplied wire nuts. Connect
the white supply wire to the white fixture wire. Secure with the
supplied wire nuts. Attach the green J-Box wire around
green hexagonal head screw or connect it to the green
supply grounding wire of the fixture.
Secure all wire with electrical tape (not supplied).
Tuck all wires carefully into the J-Box.
MOUNT THE FIXTURE AND INSERT THE BULB
Align the fixture body onto the mounting bracket and secure
with the supplied thumb screws.
Insert the bulb.
DO NOT EXCEED THE MAXIMUM WATTAGE AS
STATED ON THE WARNING LABEL.
SECURE THE GLASS SHADE
Slide the glass shade between the fixture backplate
and the metal bands.
Please ensure that the fitting is cool and
switched off before replacing the bulb.
DO NOT use bulbs that might exceed the
maximum wattage, stated on caution label.
CAUTION
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS LIGHTING FIXTURE
VER: 20.01.1