Installation Guide

PREPARE THE FIXTURE

If there is an existing fixture remove it.

Expose the supply wires from the J-box.

Install the crossbar plate and mount it to the J-Box

with the supplied screws.

WHAT YOU NEED

•

Screwdriver

• Wire Cutters

• Wiring Supplies as Specified

by Electrical Code

CERTIFICATION: cULus DAMP NO.

62237LEDD

CONNECT THE WIRES AND MOUNT THE

FIXTURE

Gently pull the supply wires through the hole in the crossbar

plate. Connect the black supply wire to the black fixture

wire. Secure with the supplied wire nuts. Connect the white

supply wire to the white fixture wire. Secure with the supplied

wire nuts. Attach the green J-Box wire around green

hexagonal head screw or connect it to the green supply

grounding wire of the fixture. Secure all wires with electrical

tape (not supplied). Tuck all wires carefully into the J-Box.

Align the holes of fixture and crossbar hanging screw.

Secure with the supplied knobs.

MOUNT THE METAL SHADE

Place the metal shade to the fixture. Align the hole

and secure with the hook.

RESTORE THE ELECTRICITY AND

CHECK THE OPERATION OF YOUR

NEW ACCESS LIGHTING FIXTURE

If the fixture is to be removed or replaced,

please ensure that the electricity is

switched off and that the fitting is cool

before touching it.

CAUTION

VER: 19.01.1