Installation Sheet

2
4
2
CERTIFICATION: UL DRY NO. 62326
3
MOUNT THE CROSSBAR AND MAKE
WIRE CONNECTIONS
Expose the supply wire from the outlet box. Mount the
crossbar to the junction box with the supplied screws
Gently pull the supply wires through the hole in the
crossbar. Connect the black supply wire to the black
fixture wire. Secure with the supplied wire nuts. Connect
the white supply wires to the white fixture wire. Secure
with the supplied wire nuts. Either wrap the green wire
around one of the protruding screws or connect it to the
supply ground wire. Secure all wire with electrical tape
(not supplied). Tuck all wires carefully into the J-Box.
MOUNT FIXTURE TO THE CROSSBAR PLATE
Adjust the length of fixture by using grip lock.
Position the canopy over the crossbar plate.
Align the holes in the canopy and secure with the
supplied thumb screws.
SECURE THE GLASS SHADES AND INSERT
THE BULBS
Hold the glass shades at a slight angle to the fixture
and fit over the socket spring.
Do not insert shades vertically as the glass may crack.
Insert the supplied bulbs. MAXIMUM WATTAGE 40W.
DO NOT EXCEED THE WATTAGE AS STATED
ON THE WARNING LABEL AND IN THE INSTRUCTION
SHEETS