Installation Sheet

2
4
2
CERTIFICATION: UL DRY NO. 62331LEDD
3
MAKE WIRE CONNECTIONS
Gently pull the supply wires through the hole in the
crossbar. Connect the black supply wire to the black
fixture wire. Secure with the supplied wire nuts. Connect
the white supply wires to the white fixture wire. Secure
with the supplied wire nuts. Either wrap the green wire
around one of the protruding screws or connect it to the
supply ground wire. Secure all wire with electrical tape
(not supplied). Tuck all wires carefully into the J-Box.
MOUNT FIXTURE TO THE CROSSBAR PLATE
Adjust the length of fixture by using grip lock.
Position the canopy over the crossbar plate.
Align the holes in the side of the canopy and secure with the
supplied screws.
INSALL THE ACRYLIC DIFFUSERS
Put up the metal ring from the top of LED cylinder.
Installed the acrylic diffusers one by one.
Please wear clean gloves when installing acrylic
diffusers.
Organic solvent should be prohibited from the acrylic
diffusers and only use cotton fabric wetting with
water when clean it.