Instructions / Assembly

MOUNT THE CROSSBAR
If there is an existing fixture remove it.
Determine the desired location of the fixture.
Hold the crossbar up to the surface and mark with a pencil
the location of the mounting plugs. Drill a hole and insert
the supplied mounting plugs into the mounting surface.
Position the crossbar into the junction box. Align the holes
of the crossbar and secure with the supplied screws.
MAKE WIRE CONNECTION AND MOUNT
THE CANOPY TO THE CROSSBAR
Expose the supply wires from the J-box. Gently pull the
supply wires through the hole in the crossbar plate.
Connect the black supply wire to the black fixture wire.
Secure with the supplied wire nuts. Connect the white
supply wire to the white fixture wire. Secure with the
supplied wire nuts. Attach the green J-Box wire around
green hexagonal head screw or connect it to the green
supply grounding wire of the fixture. Secure all wires
with electrical tape (not supplied).
Tuck all wires carefully into the J-Box.
Fit the fixture canopy up to the crossbar. Align the holes
of the canopy and crossbar. Secure with the
supplied screws.
1
WHAT YOU NEED
•
Screwdriver
• Wire Cutters
• Wiring Supplies as Specified
by Electrical Code
2
2
CERTIFICATION: cULus DAMP NO. 63968LEDD
3
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS LIGHTING FIXTURE
If the fixture is to be removed or replaced,
please ensure that the electricity is
switched off and that the fitting is cool
before touching it.
CAUTION
VER: 19.01.1
L
N