Instructions / Assembly

PREPARE FIXTURE
If there is an existing fixture remove it.
Option A - For use without the cord
Expose the supply wires from the junction box.
Mount the crossbar to the J-box with the supplied
screws.
Option B - For use with the cord
Drill a hole and insert the supplied mounting screws into
the mounting surface. Secure the key hole mounting bracket
to the mounting screws.
1
4
2
CERTIFICATION: cULus DRY NO. 70003LED
3
CONNECT THE WIRES
Option A - For use without the cord
Connect the black supply wire to the black fixture wire.
Secure with the supplied wire nuts. Connect the white
supply wires to the white fixture wire. Secure with the
supplied wire nuts.
Attach the green J-Box wire around
green hexagonal head screw or connect it to the green
supply grounding wire of the fixture.
Secure all wires
with U.L. Certified electrical tape (not supplied).
Option B - For use with the cord
Gently feed the supplied cord through the opening in
the lower end of the fixture base. Continue to pull the
cord through opening. Follow the same wire connection
procedure as with option A.
MOUNT THE BACKPLATE
Fit the fixture base up to the mounting plate.
Align the holes at the side of the plate.
Tighten the screw with screwdriver.
PLUG-IN TO THE SOCKET
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS LIGHTING FIXTURE
If the fixture is to be removed or replaced,
please ensure that the electricity is
switched off and that the fitting is cool
before touching it.
CAUTION
2
Option A - use without the cord
Option A - use without the cord
Option B- use with the cord
Option B- use with the cord
VER: 18.10.1
L
N
Option A - use without the cord Option B- use with the cord
L
N