Quick Guide

10
3. Tap > Local Config > Device Wi-Fi Configuration, enter the Wi-Fi password and
tap Start to add the camera to the NVR.
9 Web Login
Before you begin, check that your PC is connected to your NVR through network.
1. Open the browser on your PC, enter the IP address in the address bar, then press
Enter. Install the plugin as required at first login. Close your browser during the
installation.
2. In the login page, enter the correct username and password, then click Login.
Disclaimer and Safety Warnings
Copyright Statement
No part of this manual may be copied, reproduced, translated or distributed in any form or by
any means without prior consent in writing from our company (referred to as us hereafter).
The product described in this manual may contain proprietary software owned by our company
and its possible licensors. Unless permitted, no one is allowed to copy, distribute, modify,
abstract, decompile, disassemble, decrypt, reverse engineer, rent, transfer, or sublicense the
software in any form or by any means.
Trademark Acknowledgements