Specifications

PARAMETER REFERENCE MANUAL119
MULTI MODE PARAMETERS
Patch Volume
Quick access to the Patch Volume parameter, used for balancing levels between different programs.
Tempo
Quick access to the internal clock rate In Multi Mode, this controls the Master Clock parameter.
Init Volume
Off, 1 to 127: Initializes MIDI volume (CC#7) for the current Part whenever this Multi program is selected. See
Volume RX below.
Low Key
C-2 to G8: The lowest MIDI note to which this Part will respond. If this is set higher than High Key (see be-
low), the range between Low Key and High Key is disabled, and all notes outside this range are enabled.
HighKey
C-2 to G8: The highest MIDI note to which this Part will respond. If this is set lower than Low Key (see
above), the range between Low Key and High Key is disabled, and all notes outside this range are enabled.
HoldPedal
Disabled, Enabled: Species whether the Part will respond to MIDI CC#64 (usually a Sustain Pedal).
Volume RX
Disabled, Enabled: Species whether the Part will respond to MIDI CC#7 (Volume).
Prog Change
Disabled, Enabled: Species whether the Part will respond to MIDI Program Change messages. The global
“Program Change” parameter in the CONFIG menu is ignored.