User Guide

246 CHAPTER 23
Tips, tricks and other Words of Wisdom
controller similar to Channel Vol-
ume that can be used indepen-
dently as a volume control or to
create gate effects (Controller #7).
It is also reset by Controller Reset
(double click on PANIC). The
default setting is 127.
Bank/Program Change via
SysEx
A bank or program change can be
initiated via a SysEx command.
These commands are independent
of MIDI channels as well as all
other SysEx parameter changes.
SysEx program changes are always
carried out irrespective of whether
or not the normal program change
is disabled.
Part Bank Select (the change is exe-
cuted only when a program change
command is received)
F0,00,20,33,01,10,72,pp,1F,vv,F7
Part Bank Change (the change is exe-
cuted immediately)
F0,00,20,33,01,10,72,pp,20,vv,F7
Part Program Change F0,00,20,33,01,10,72,pp,21,vv,F7
Multi Program Change F0,00,20,33,01,10,72,00,69,vv,F7
pp: Part Number from 00 to 0F
(0 - 15), vv: Program Number
from 00 to 7F (0-127)