iPhone/iTouch/Nano G3 Mini Speaker Instruction Manual -----------------------------------------------------------FREE PRODUCT WARRANTY REGISTRATION Protect your investment and take advantage of this free product warranty. YOU MUST REGISTER WITHIN 30 DAYS of purchase to receive full warranty coverage and access to special offers. www.AccessoryPower.
Contents Overview……………………………………………………………… 3-4 3 3 3 4 4 Features of the GO GROOVE MOVE Delivery includes Environment-protection information Installation Maintenance and care Connection…………………………………………..…….. 5-7 5 6 6 6 7 7 7 Battery installation Wiring diagram of the GO GROOVE MOVE Operating with iPhone Operating with iTouch Operating with Nano G3 Connecting with power adapter Connecting with other devices Operating elements……………………………………….. 8-9 Operating the GO GROOVE MOVE……………………….
Overview Features of the Go Groove MOVE The GO GROOVE MOVE has a built-in 2.0 Amplifier and 4 Speakers. This system produces Hi-Fi audio that does not diminish sound quality at maximum sound levels. The GO GROOVE MOVE accommodates the iPhone/iTouch/Nano G3. Simplicity and convenience come together in the design of the 3-Button Control System located on top of the unit. You can power the GO GROOVE MOVE with the provided AC Power Source or four (4) AA Batteries, which is convenient when on-the-go.
Overview Installation ● Place the unit on a flat, hard and stable surface. ● If placing it in a cabinet, allow at least 10 cm (4 inches) of clearance from the rear, the top and each side of the unit for adequate ventilation. ● Do not expose the unit to extreme heat, cold or humidity. ● The GO GROOVE MOVE should not be near water. ● Flame sources, such as lighted candles, should not be placed near the GO GROOVE MOVE.
Connection Battery installation Figure 1 Figure 2 Figure 3 1. Open the battery covers at the back of the speakers by pressing the two catches.(as the arrow indicates in Figure 1) 2. Place 4 AA batteries(as Figure 2 indicates) in the battery compartments. 3. Close the battery cover by snapping it in place.(See Figure 3.) Note: 1. During long periods where the speaker is not in use, remove the batteries to prevent damage from battery leakage. 2.
Connection Wiring diagram of the GOGROOVE MOVE Operating with iPhone — Ensure the iPhone is fully and properly inserted in the port of the speaker. Next, push the frame of the speaker in place. Play your favorite music by operating the iPhone. Operating with iTouch — Take out the sponge stickers for iTouch, and detach the sponge and the white paper. Then, stick them on the corresponding position of the speaker. — Ensure iTouch is fully and properly inserted in the port of the speaker.
Connection Operating with Nano G3 — Take out the sponge stickers for the Nano G3. Detach the sponge and the white paper. Then, stick them on the corresponding position of the speaker. — Ensure Nano G3 is fully and properly inserted in the port of the speaker. And push the frame of the speaker in place. Play your favorite music by operating the Nano G3. Connecting with Power Adapter — Connect the GO GROOVE MOVE to the power source with the provided power adapter.
Operating elements 1. Power LED －It will be lit when the speaker is on and dark when the speaker is off. 2. STANDBY-ON －Turn on the speaker or switch to standby mode. 3. VOLUME – －Turn down the volume. 4. VOLUME + －Turn up the volume. 5. INPUT －Connect with external audio source. 6. Right battery compartment －Install the AA batteries. 7. DC input jack －Connect with DC input. 8. Stabilizing structure －Hold the speaker. Stand it on a desk, vertical or horizontal. Hang it on the wall.
. Left battery compartment －Install the AA batteries. 10. Catch －Lock the frame. Operating elements 11. Frame －Use for installing iPhone/iTouch/Nano G3. 12. iPhone Port －The port that connect with iPhone/iTouch/Nano G3. 13. Left speaker system 14. Right speaker system Operating the GO GROOVE MOVE Turn the GO GROOVE MOVE on/off — Connect the GO GROOVE MOVE to the power source with the provided power adapter.
● Gently press the volume -/+ button on the top of the speaker to adjust to a comfortable volume. Swinging the GO GROOVE MOVE ● If you want to play video from iPhone or iTouch, adjust the stabilizing structure on the back of GO GROOVE MOVE until it turns 90 degrees according to the icon. Then you can watch videos on your iPhone/iTouch. Operating the GO GROOVE MOVE Note: AA batteries do not charge the iPhone/iTouch/Nano G3.
Specifications Specifications ● Dimensions：170*170*32MM ● Net weight：500G ● Power：7.5W ● Voltage input：DC5.5V 1.5A ● Electrical level：500～800mV ● Speaker：1.2″2W 8Ω*4 ● Power output：2.5W*2 T.H.D=10% ● Frequency response：80HZ~20KHZ ● Resolution：≥40dB ● Signal-to-Noise：≥60dB Subject to modification. Troubleshooting Warning Under no circumstances should you try to repair the system yourself, as this will void the warranty. Do not open the system, as there is a risk of electric shock.
Troubleshooting Problem Solution √ Try checking the power adapter is properly connected with the unit. √ Make sure the DC output of the adapter is 1 No power to unit. normal. √Try pressing the STANDBY ON button on the top of speaker to turn on the unit. √Try adjusting the volume. √Make sure iPhone/iTouch/Nano G3 is properly 2 Distortion or no sound from the speaker. and fully inserted. √ Make sure the iPhone/iTouch/Nano G3 is functioning properly.
- 13 -
