Instruction manual

- 9 -
9. Left battery compartment
－Install the AA batteries.
10. Catch
－Lock the frame.
Operating elements
11. Frame
－Use for installing iPhone/iTouch/Nano G3.
12. iPhone Port
－The port that connect with iPhone/iTouch/Nano G3.
13. Left speaker system
14. Right speaker system
Operating the GO GROOVE MOVE
Turn the GO GROOVE MOVE on/off
— Connect the GO GROOVE MOVE to the power source with the provided power adapter.
Insert the AC plug into your local power supply / wall outlet, and the other end into the DC
input jack
on the back of the GO GROOVE MOVE.
Play/Stop the iPhone/iTouch/Nano G3
● Ensure iPhone/iTouch/Nano G3 is fully and properly inserted in the port of the speaker. Push
the frame of the speaker in place. Play your favorite music by operating the
iPhone/iTouch/Nano G3.
● You can stop the music by using the controls on the iPhone/iTouch/Nano G3. Gently slide the
catch on the top of the frame to open it. Take out your player.
Note: Every time you use iPhone to play music, iPhone will switch to “Flight mode” automatically.
In this case you can not answer any calls until you turn the “Flight mode” off manually.
Adjusting the volume