Installation Guide

INSTALLATION INSTRUCTIONS
Please read carefully and save these instructions, as you may need them at a later date.
CAUTION
GENERAL
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)
standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a
qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no parts are
missing by referencing the illustrations on the installation instructions.
1. OUTLET BOX
2. WHITE WIRE
3. BLACK WIRE
4. GROUND WIRE
5. WIRE CONNECTOR
6. GREEN SCREW
7. HEX NUT
8. MOUNTING SCREW
9. MOUNTING BAR
10. BOX SCREW
11. BACK PLATE
12. BALL NUT
13. COVER
14. SOCKET
15. BULB
16. GLASS SHADE
17. LAMP BODY
18. SCREW
WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit
conductor. Min 90ºC supply conductors.
Turn off the main power at the circuit breaker before installing the fixture, in order to prevent
possible shock.
ASSEMBLY AND INSTALLATION
1.Thread two Mounting Screws(8) to the Mounting bar(9) and secure with the Hex nut(7).
2.Secure the Mounting bar(9) to the Outlet box(1) with Box screw(10).
3.Pull out the outlet wire and ground wire from the Outlet box(1).Make wire connections
--White wire (w/o marking) from light to White wire(2) from power source.
--Black wire (w/o marking) from light to Black wire(3) from power source.
--Loop the Ground wire(4) to Mounting bar(9) with a Green screw(6)
4.Attach the Back plate(11) against the Outlet box(1),secure with the Ball nut(12)
5.Install bulbs: (bulbs not included)
(Do not exceed the maximum capacity recommended on the sockets).
6.Insert glass shade(16) into lamp body(17).
7.Put the lamp body(17)into cover(13), then secure it with screw(18) (See Fig:1)
INSTALLATION IS NOW COMPLETED
1500 Cherokee Parkway, Suite 100, Acworth, GA 30102
P: 866-845-5451 • F: 866-816-6165
E: [e-mail] • www.acclaim-lighting.com